Tungsten Carbide Burrs

General Information



To enable you to always choose the right burr for each application we offer a wide selection of products. Thus you will achieve optimum results in milling and cutting. In practical tests it was proven that LUKAS tungsten-carbide burrs produce maximum tool life since their cut has been set for the relevant job. Even for the cutting of GRP (glass-fibre reinforced plastic) and CRP (carbon-fibre reinforced plastic) we can offer the appropriate GRP and CRP rotary burrs.
LUKAS tungsten-carbide burrs are high-quality precision tools which have produced excellent results in milling and deburring with industrial robots or in off-hand milling, deburring as well as preparing and finishing of welding seams. For a further increase in wear resistance, the reduction of the machining forces and an improvement in the chip removal we are also prepared to cover your LUKAS tungsten-carbide burrs with special hard coatings.

High Performance
  ###NAME###

Tungsten Carbide Burrs with TiAlN Coating

The coating of rotary burrs contributes to an increase in wear resistance, a decrease in the chipping forces and an improved removal of chips. Many shapes and sizes of the universal cut 7 are available ex stock.

  ###NAME###

HFC Tungsten Carbide Rasp Burrs, Shape C, Cylindrical Round nose

Diameter 12 mm with ZR-cut, available with shank 6 mm

  ###NAME###

Tungsten Carbide Rotary files,in various shapes

Diameter 6 to 12 mm with ZF-cut, available with shank 6 mm

Industry
  ###NAME###

HFA Tungsten Carbide Burrs, Shape A, Cylinder

Diameter 2 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFAS Tungsten Carbide Burrs, Shape A, Cylinder with end cut

Diameter 2 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFC Tungsten Carbide Burrs, Shape C, Cylindrical round nose

Diameter 2 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFD Tungsten Carbide Burrs, Shape D, Spherical

Diameter 3 to 20 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFE Tungsten Carbide Burrs, Shape E, Oval

Diameter 3 to 20 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFF Tungsten Carbide Burrs, Shape F, Arch round nose

Diameter 3 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFG Tungsten Carbide Burrs, Shape G, Arch pointed nose

Diameter 3 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFH, Tungsten Carbide Burrs, Shape H, Flame

Diameter 3 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFI Tungsten Carbide Burrs, Shape I, Internal burr with multi-purpose cut

Diameter 2 to 8 mm to work in drill holes, available with shank 3 and 6 mm

  ###NAME###

HFJ Tungsten Carbide Burrs, Shape J, Pointed nose

Diameter 6 to 16 mm with single cut Z3, available with shank 6 and 8 mm

  ###NAME###

HFL Tungsten Carbide Burrs, Shape L, Conical round nose

Diameter 8 to 20 mm with single and cross cut, available with shank 6 and 8 mm

  ###NAME###

HFM Tungsten Carbide Burrs, Shape M, Conical pointed nose

Diameter 3 to 12 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFN Tungsten Carbide Burrs, Shape N, Inverted cone

Diameter 3 to 12 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFNS Tungsten Carbide Burrs, Shape N, Inverted cone with end cut

Diameter 3 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HFP Tungsten Carbide Burrs, Shape P, Special milling cutters to machine fibre-reinforced plastic

Diameter 2 to 16 mm with single and cross cut, available with shank 3, 6 and 8 mm

  ###NAME###

HGE Engraving cutters of solid carbide, single-flute type

Cutters with mirror finished flutes. Particularly suited for the machining of light and non-ferrous metals, plastics and for high-speed machining of aluminium parts.

  ###NAME###

HFR Tungsten Carbide Burrs, Shape R, Trimming burr (external)

Diameter 8 to 13 mm with single cut, available with shank 6 and 8 mm

  ###NAME###

HFS Tungsten Carbide Burrs, Shape S, Trimming burr (internal)

Diameter 16 to 22 mm with single cut, available with shank 8 mm

  ###NAME###

Miniature burrs

Various shapes with diameter 1 to 2 mm with fine universal cut, available with shank 3 mm

  ###NAME###

Miniature burrs

Various shapes with diameter 2 to 8 mm with single cut, available with shank 3 mm

  ###NAME###

Tool sets

Tool sets of 10 pieces with burrs in various shapes with fine cross cut, available with shank 3 and 6 mm

  ###NAME###

Burrs for Machining of Non-ferrous Metals

Various shapes in diameter 6 to 20 mm with single cut (cut 9), available with shank 6 and 8

  ###NAME###

Burrs with Extended Shank Length

Various shapes in diameter 6 to 12 mm with single and cross cut), available with shank diameter 6 and 8 mm and an extended shank length of 200 mm

  ###NAME###

Examples of our Service Capability

Tools for stationary use Subland twist drills, radial burrs, burrs with shank, die-sinking burrs and profile burrs in special shapes with a cut diameter of up to 12 mm and a tool length of 250 mm

  ###NAME###

Examples of our Service Capability

Rotary burrs for manual and stationary use

Base
  ###NAME###

HFA Tungsten Carbide Burrs, Shape A, Cylinder BASE-X

Diameter 3 to 12 mm with cross cut ZX, available with shank 3and 6 mm

  ###NAME###

HFC Tungsten Carbide Burrs, Shape C, Cylindrical round nose BASE-X

Diameter 3 to 12 mm with cross cut ZX, available with shank 3 and 6 mm

  ###NAME###

HFD Tungsten Carbide Burrs, Shape D, Spherical BASE-X

Diameter 4 to 12 mm with cross cut ZX, available with shank 3 and 6 mm

  ###NAME###

HFF Tungsten Carbide Burrs, Shape F, Arch round nose BASE-X

Diameter 3 to 12 mm with cross cut ZX, available with shank 3 and 6 mm

  ###NAME###

HFG Tungsten Carbide Burrs, Shape G, Arch pointed nose BASE-X

Diameter 3 to 12 mm with cross cut ZX, available with shank 3 and 6 mm

  ###NAME###

HFL Tungsten Carbide Burrs, Shape L, Conical round nose BASE-X

Diameter 12 mm with cross cut ZX, available with shank 6 mm

  ###NAME###

HFM Tungsten Carbide Burrs, Shape M, Conical pointed nose BASE-X

Diameter 3 to 12 mm with cross cut ZX, available with shank 3 and 6 mm

  ###NAME###

Tungsten Carbide Burrs, Tool sets BASE-X

Tool sets of 5 pieces with burrs in various shapes with ZX-cross cut, available with shank 3 and 6 mm

  ###NAME###

Burrs with Imperial-Sized Shanks, BASE-X

Diameter 6 to 12 mm with ZF-cut, available with shank ¼”